Atdec Flush Universal Flush Projector Mount
For business or home theater use, choose the Atdec Flush Universal Flush Projector Mount that compliments your projector and enhances your impression. The well-polished white color mount is ideal for any interior and it also minimizes installation time, simplifies maintenance and offers integrated security. It supports up to 15kg (33lbs) which is applicable for most of the projectors. This mount holds the projects very safely and securely alters the roll of your image up to 20 degrees from center. Coming with 360 Degree Swivel rotation it can be rotated left or right of its original position, without distorting the projection image. Its quick release function releases the projector from the ceiling mount in one quick motion, offering easy maintenance. Get the Atdec Flush Universal Flush Projector Mount and project with ease!
What It Is And Why You Need It:
A Closer Look
Projector Accessories GS
Have an opinion on this product that you would like to share? If, so please take a few moments to write your rating and review.Write your own review
Does the job
Only drawback is that the part between the top and bottom parts is a little loose (1mm or so) which can make it hard to perfectly level the projection
Worked great for my projector
With this mount I was able to secure my projector to the ceiling nicely. I needed a mount that could safely hold a heavy unit. My panasonic tips the scales at a whopping 19lbs! The supplied hardware that was included was meant for a 4 arm system (only four screws, spacers, etc.. of each size) My projector likes 5. So I took one of the longer screws and cut it down to the length needed, used the extra arms provided, and everything worked like a charm. Balance is the key when mounting it. I attached the mount, tied a heavy string to the center post of the mount and lifted straight off the counter. Offset was way off center. Loosened the arm screws and slid the mount over till it was balanced forward and back, side to side. Once mounted to a rafter in the ceiling I was able to loosen the aim adjusting bolts aim and re-tighten with ease. I'm happy with this mount.
Worked fine, Would buy again
For the price, it did what was expected.
Great Price, Great Mount
I received the mount yesterday and installed it in about 30 minutes. It comes with a multitude of hardware to conform to whichever projector you have and each is labeled and separated so you're not digging through a pile of screws and comparing them to a diagram. Most of the time was spent pinpointing the overhead beam for the lag bolts, but other than that, it was a quick setup. GREAT BUY!
It works with large projectors
I used the mount to hook up my gigantic 6500UB which is the brother to the 8500 and it fits. It took a little bit to figure out the best configuration for the extension arms, but once done, it was pretty easy to get mounted. Solid steel, good quality product, may take somebody good with puzzles to figure out hole alignment, but other than that, it was definitely worth it.
has been successfully added to your cart.